Driveway Pressure Washing in Bellevue
A lot of driveways in Eastgate, Crossroads, and Lake Hills are exposed-aggregate concrete poured decades ago, with years of drips from parked cars and moss filling in the joints. The texture that gives aggregate its grip is also what holds onto dirt.
Aggregate texture traps oil, grit, and moss in every gap
The small stones in exposed-aggregate concrete leave tiny pockets between them, and that's where oil drips, tire grime, and moss spores settle. Over a few Bellevue winters the whole surface goes dark, and the joints between slabs turn green.
Full-slab surface cleaning, edge to edge
Starting at $200 We treat oil and rust spots, clean the whole slab edge to edge, detail every joint and edge, then rinse and inspect the slab. Add polymeric sanding for paver joints if you want it.
A driveway that looks as cared for as the rest of the house
The stones show through clean again and the joints lose their green line, so the first thing people see when they pull up matches the effort you put into the rest of the property.
A cracked, re-poured driveway costs far more than routine washing
Left unwashed year after year, trapped water keeps working deeper into the concrete until small cracks become real damage — patchwork repair or a full re-pour costs far more than staying ahead of it with routine washing.
Save on your first service — New customers get 10% off.
Save when you bundle — Request multiple services at once. Fewer trips reduce our carbon footprint and lower your bill.
Save when you subscribe — Repeat every 1, 3, 6, or 12 months.
What's included
- Pre-treat. Oil and rust spots get a targeted stain treatment before the main wash, so it has time to break the stain down.
- Surface clean. The whole slab is cleaned edge to edge, matched to your surface, for an even finish with no streaking.
- Edge & detail work. Expansion joints, edges, and tight spots along the garage and walkway get cleaned too, not just the open slab.
- Rinse & inspect. We walk the driveway before we leave. Polymeric sanding for paver joints is available as an add-on.
Worth knowing
Pressure washing can expose problems that were already there — hairline cracks, worn sealant, or loose paver joint sand often show up more clearly once the surface is clean. We'll point out anything we notice, but we can't be responsible for damage from pre-existing wear.
Frequently Asked Questions
Is pressure washing safe for an older exposed-aggregate driveway?
Yes. The clean is matched to the surface: enough to clear between the stones without working at them. If any stones are already loose, we'll point them out before we start.
We're getting ready to list our Bellevue house. Is a driveway wash worth it?
It's one of the first things buyers and listing photos see, and a clean driveway makes the whole front of the house look better kept. Text us your listing date and we'll schedule it ahead of the photos.
How often should I pressure wash my driveway in the Seattle area?
With how much rain and shade the Eastside gets, moss and algae come back fast. Most homeowners get the best results washing once a year, or twice if your driveway sits under trees or doesn't get much direct sun.
Is pressure washing safe for stamped concrete or pavers?
Yes — the clean is matched to the surface. Stamped concrete and pavers get a gentler clean that protects the finish and joint sand, while plain concrete can handle a more aggressive one.
Other services in Bellevue
- Gutter Cleaning
- Roof Cleaning
- Move-Out Cleaning
- Patio & Deck Washing
- Siding & House Washing
- Fence Washing
- Window Cleaning
Driveway Pressure Washing in other Eastside cities
Driveway Pressure Washing across the Eastside · All services · Our service area